VS Sensorik axial speed encoders

The VS-Sensorik non-contact axial speed sensor (TCE series) is easy to use and measures the

magnetic target at the end of the rotating shaft to obtain a stable value of the rotational speed.

Product advantages of axial rotary encoders:                                      

•  Measuring speeds up to 120,000 RPM

• Operating temperature -40... +150°C

• Minimum distance of 3mm between the sensor readhead and the non-contact measuring surface

• Minimum magnetic sensing target diameter 5 mm

• Supply voltage 7.... .32VDC

• Interpolated signal amplification up to 1024

• Analogue signal output 1VPP, SIN, COS

• Digital signal outputs A, B, Z/U, V, W